ASTERISK - Re: [Asterisk-Users] CallerID+Distinctive ring in Australia

[PHP Mechanic]

> Elliot Mackenzie wrote:
>
>> I have a situation involving both caller id and distinctive ring in 
>> australia that appears to be having issues.  I am using the CVS snapshot 
>> current as of an hour ago.
>>
>> The distinctive ring was working ok until i arranged for the telco to 
>> turn on callerid: now the distinctive ring detection appears flaky and 
>> there is no callerid detected.
>> By flaky distinctive ring, I mean the three numbers that are being 
>> detected on an incoming call (ever since callerid was switched on), vary 
>> from [0,0,0] to more sensible numbers (sensible, though they still vary 
>> by too much to make sense of).
>>
>> Once I have seen "callerID returned with error", but this only happened 
>> once and said nothing further.  I haven't replicated this message when I 
>> have had the debugging cranked right up unfortunately.
>>
>> There was a newspost a while back that suggested increasing a delay in 
>> callerid.c, which I have done but to no avail.  I increased it from 
>> "4000" to "5600", as per the original post.
>>
>> Does anyone have ideas for what to try, or for how to start digging 
>> further?  This problem has been plaguing me for a month now.


Have you tried this?
http://www.voip-info.org/tiki-index.php?page=Asterisk+and+Australian+Caller+ID