[Asterisk-Users] No busy-tone

[Eric Wieling]

Oh that!

Just put a Busy() at priority+101

Look at the [macro-std-exten] in the 
asterisk/configs/extensions.conf.sample for another way to do it.

The remote device is telling Asterisk the destination is busy.  Now you 
have to tell your dialplan what to do.  Do you send a busy tone to the 
caller?  Do you dial a different destination?

Nicklas Bondesson wrote:
> Ok, here't the output from console:
> 
> Executing Dial("SIP/200-f359", "SIP/NNNNNNNNN at xxx.xx||T") in new stack
>     -- Called NNNNNNNNN at xxx.xx
>     -- Got SIP response 486 "Busy here" back from xxx.xxx.xxx.xxx
>     -- SIP/xxx.xx-7d58 is busy
>   == Everyone is busy/congested at this time
> 
> Thanks
> Nicklas
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric Wieling
> Sent: den 7 november 2004 20:02
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] No busy-tone
> 
> Nicklas Bondesson wrote:
> 
>>I don't hear anything. There's no sound at all.
>>
>>Nicklas
>>
>>-----Original Message-----
>>From: asterisk-users-bounces at lists.digium.com
>>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Eric 
>>Wieling
>>Sent: den 7 november 2004 17:21
>>To: Asterisk Users Mailing List - Non-Commercial Discussion
>>Subject: Re: [Asterisk-Users] No busy-tone
>>
>>Nicklas Bondesson wrote:
>>
>>
>>
>>>I don't hear a busy-tone when calling an external extension that's busy. 
>>>I just get the Busy Here 486 message in the debugging log. Any ideas?