[Asterisk-Users] Outgoing call fails on pulse dial line

[Goran Obradovic]

Hi,

I tried patch with Asterisk 1.0.2 and Zaptel 1.0.2 and it is ok. Pacth
utility reported that it successfully installed all the diffs. However, when
I try to dial out, it doesnt break the dial tone which is typical issue when
you have tone dialing device dialing pulse line (in case of regular phone
you just change the settings on the phone set from tone to pulse). When I do
zap show channel I see that it still reports that channel is not pulse
based, despite the fact that I changed my zapata.conf with pulse=yes. It
looks like this is not solved with the patch at all.

Maybe I am making a mistake in my zapata.conf or extension.conf. Question is
how to get that Asterisk reports in "zap show channel" that channel is in
pulse mode? I suppose that if Asterisk "knows" that channel is in pulse mode
it will do something useful on the zaptel level and it will break the dial
tone and do the right thing. 

I don’t know how about other countries but I suppose that there are large
portions of Eastern Europe where pulse lines are still in use, so fixing
this problem would be nice. For me if there is no this feature I simply can
not use Digium/Asterisk. 


-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Vladyslav
Sent: Wednesday, November 03, 2004 8:07 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Outgoing call fails on pulse dial line

Hi
Some time ago I have tried that without success :(
There is an article on wiki about pulse dialing...
The guy who wrote that patch from Kiev and I have contact him about bugs
etc...
Anyway that patch did not work well on my installation.

Take a look at
http://www.voip-info.org/tiki-index.php?page=Asterisk%20zaptel%20pulse%20dia
ling

Good luck.

On Tue, 2004-11-02 at 22:57, Goran Obradovic wrote:
> I have Digium FXO/FXS card and one of my phone lines is with pulse
> dialing. At first I didn’t have dial tone at all, but after upgrading
> my Asterisk and Zaptel SW to the latest one (1.0.2) I have dial tone.
> But, when I try to dial outgoing number it fails after first key
> pressed. Does anyone know how to solve this? I am in Eastern Europe
> (Belgrade, Serbia) and our phone lines are mixture of old (pulse) and
> new ones. So I have 2 lines in my house, one with tone dialing and one
> with pulse dialing. Is this related to some signaling settings in
> Zapata.conf? 
> 
> Thanks,
> 
> Goran
> 
> 
> 
> ______________________________________________________________________
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Best regards
Vlad

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users