[Asterisk-Users] Problem with QuadBRI

[Matthew Enger]

Try following the instructions inside the bristuff package to use the
zaptel in there.

bristuff uses stable asterisk and the patches seem to be very dependent
on the date stamp of CVS the package downloads (due to CVS changing alot
I guess).



On Wed, 2004-05-19 at 10:05, Michael Devenijn wrote:
> - I'm not a Linux user i'm trying to get in it ...
> - Fedora core 1
> - QuadBRI card bought from junghanns.net
> - We want to use the card in TE mode to connect to the TELCO
> - Downloaded BRISTUFF0.0.2(stable) latest from junghanss.net/asterisk
> - followed the instructions on voip-info.org
> - compiled everything still got the error when "make load" in qozap : 
> 
> insmod ./qozap.o
> ./qozap.o: unresolved symbol zt_ec_chunk
> ./qozap.o: unresolved symbol zt_unregister
> ./qozap.o: unresolved symbol zt_transmit
> ./qozap.o: unresolved symbol zt_receive
> ./qozap.o: unresolved symbol zt_register
> make: *** [load] Error 1
> 
> when i execute ztcfg -v -c /etc/zaptel.conf we get : 
> 
> Zaptel Configuration
> ======================
>  
> SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
> SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1)
> SPAN 3: CCS/ AMI Build-out: 399-533 feet (DSX-1)
> SPAN 4: CCS/ AMI Build-out: 399-533 feet (DSX-1)
>  
> 12 channels configured.
>  
> ZT_SPANCONFIG failed on span 1: No such device or address (6)
> 
> Other info : 
> 
> When i look in the BIOS i see the card is on IRQ5 alone 
> When i use "cat /proc/interrupts" i see nothing on IRQ5
> 
> 
> zaptel.conf : 
> 
> ...
> 
> loadzone=nl
> defaultzone=nl
> 
> #fxsks=1
> 
> span=1,1,3,ccs,ami
> span=2,1,3,ccs,ami
> span=3,1,3,ccs,ami
> span=4,1,3,ccs,ami
> 
> bchan=1,2
> dchan=3
> bchan=4,5
> dchan=6
> bchan=7,8
> dchan=9
> bchan=10,11
> dchan=12
> 
> 
> 
> DISCLAIMER: The content of this e-mail message does not constitute a commitment of DKMA bvba This e-mail and any attachments thereto may contain information which is confidential and/or protected by intellectual property rights and are intended for the intended recipient only. Any use of the information contained herein ( including, but not limited to, total or partial reproduction, communication or distribution in any form ) by persons other than the designated recipient(s) is prohibited.If an addressing or transmission error has misdirected this e-mail, please notify the author, either by telephone or by e-mail and delete the material from any computer.
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Matthew Enger <menger at xi.com.au>
Xintegration