[Asterisk-Users] asterisk with E1

[Daniel Bichara]

Hi Thomas,

Check your /etc/zaptel.conf and /etc/asterisk/zapata.conf. Probably you 
have not configured your channels at zapata.conf.

Daniel


Thomas Schroeter wrote:

>Hi,
>I use asterisk with a Digium E1 (wct1xxp). On my old server, 
>everything went fine, but after having built the card to a new one, I 
>only have problems:
>
>    -- Executing Dial("IAX2[guest at 217.X.X.X:18308]/1", "Zap/1/853") 
>in new stack
>May 15 14:10:37 NOTICE[15376]: app_dial.c:554 dial_exec: Unable 
>to create channel of type 'Zap'
>  == Everyone is busy at this time
>
>ztcfg shows no errors.
>
>So where's my problem?!?
>
>Regards,
>thomas
>
>PS:
>
>zapata.conf:
>[...]
>switchtype = euroisdn
>signalling = pri_cpe
>group = 1
>channel => 1-15,17-31
>
>zaptel.conf:
>span=1,0,0,ccs,hdb3,crc4 #,yellow
>bchan=1-15,17-31
>dchan=16
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>  
>