[Asterisk-Users] Data through T1, nethdlc

[Michael A Rowley]

Hello all,

My set up is a fractionated t1, with 1-6 voice channels, 21-24 data 
channels.  I have a t100P installed in a amd 1500 with 512meg.

Question:
In order to set up the data channels, is the following correct?

1) compile new kernel with generic hdlc support
2) compile hdlc from hq.pm.waw.pl/hdlc
3) uncomment KFLAGS+=DConfig_ZAPATA_NET in zaptel makefile
4) compile zaptel,
5 compile rest of asterisk
6) add following to zaptel.conf
	span=1,0,0,esf,b8zs
	e&m=1-6
	nethdlc=21-24
7) sethdlc hdlc0 hdlc_net
	(I know there is supposed to be a parity and another setting, but 
bugger if I know that they mean... Any help would be appreciated!)
8) should now be able to access data on hdlc0

Does this sound at all correct?  Any suggestions, things I am missing?  
There is damn little documentation on this, so most of this I am 
pulling from my short hairs.

Michael Rowley