[Asterisk-Users] T100P Hang up detection

[Joseph]

I have a problem that incoming calls on a T100P can
be hung up by the remote party and the card does not seem
to notice the call drop by the remote side.

Watching this from the remote T1 side you can see the
trunk goes idle after caller drops call,
than * actually seizes the trunk again and makes it busy
until it times out and hangs it up.

Settings for the card are:
/etc/zaptel.conf

span=1,0,0,d4,ami
fxsks=1-24


/etc/asterisk/zapata.conf

group = 1
signalling=fxs_ks
context=pan_pbx
channel => 1-24

busydetect=yes

Any one have some helpful tips?

-- 
respectfully, Joseph - (606) 477-2355 x140
                       ------=============