[Asterisk-Users] * & ISDN-BRI-PTP & DID & ISDN4Linux does not show incoming number

[ePyron Felix Deierlein]

Hi Andreas,

I guess it is better to buy a B1 or C2 :-). They are not very expensive at
ebay. Or you buy digium hardware, it surely runs with *...
Or have a look at www.junghanns.net (author of chan_capi)

He sells a 4 Port BRI ...

Bye

Felix 

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com 
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of 
> Andreas Frackowiak
> Sent: Friday, May 07, 2004 11:05 AM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] * & ISDN-BRI-PTP & DID & 
> ISDN4Linux does not show incoming number
> 
> Hallo Felix,
> 
> > it seems that the FAQ only describes windows & co. 
> > Just try to use the capi driver, I guess you would get much more 
> > support for capi here...
> 
> Well now I am sure: The AVM-Fritz-CAPI does not work with PTP.
> 
> o I have tried it and it doesn't work
> o I asked AVM and they answered that the Fritz
>   CAPI-Software (Windows + Linux) does not support
>   DDI/PTP-Mode.
> o I found a lot of messages in old archives of this list
>   and the i4l-list which also say that PTP with
>   Fritz CAPI does not work.
> 
> Also "mISDN" (ISDN4Linux successor with CAPI20) maybe will 
> support P2P with Fritz Card sometime, but not today.
> 
> And so it seems that my problem between ISDN4Linux and the 
> chan_modem_i4l driver remains an unsolved mystery.
> 
> So maybe I have to buy an AVM B1 or C2 card to circumvent 
> this problem or use something else than asterisk.
> 
> thanks and regards
> Andreas
> 
> 
> > > -----Original Message-----
> > > From: asterisk-users-admin at lists.digium.com
> > > [mailto:asterisk-users-admin at lists.digium.com] On Behalf 
> Of Andreas 
> > > Frackowiak
> > > Sent: Wednesday, May 05, 2004 8:08 PM
> > > To: asterisk-users at lists.digium.com
> > > Subject: Re: [Asterisk-Users] * & ISDN-BRI-PTP & DID & ISDN4Linux 
> > > does not show incoming number
> > > 
> > > Hi Felix,
> > > 
> > > > > I am using Asterisk on a DSS1 ISDN-BRI with ISDN4Linux
> > > (and a Fritz
> > > > > Card PnP).
> > > > > The ISDN-BRI is in PTP-Mode (Point to Point "german: 
> > > > > Anlagenanschluss") which is enabled within I4L with 
> "hisaxctrl 
> > > > > fcpcipnp0 7 1".
> > > > are you shure, that the capi does not support PTP?
> > > > I have an AVM C4 card, but it should be the same with 
> the fritz..
> > > 
> > > Well, I am not sure, but AVM says in:
> > > http://www.avm.de/de/Service/FAQs/FAQ_Sammlung/2671.php3
> > > that only the B1-family of cards and the C2 and C4 Controllers 
> > > support PTP.
> > > 
> > > I would be very happy if someone has a Fritz with CAPI 
> working with 
> > > a PTP und could proove that I am wrong.
> > > 
> > > I also would be very happy if someone could help me with the 
> > > original question, why I4L does not give the called 
> number / MSN to 
> > > Asterisk (and help me fix it, of course :)
> > > 
> > > Thanks
> > > Andreas
> > > 
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > > 
> > 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> > 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>