[Asterisk-Users] Error when loading wcfxo

[Marc Spiegelman]

I found similar posts regarding this error but none that answered my
question.

 

My zaptel.conf reads: 

 

fxsks=1-2

fxoks=3

loadzone=us

defaultzone=us

 

and /proc/interrupts:

           CPU0

  0:    5542402    IO-APIC-edge  timer

  1:          2    IO-APIC-edge  keyboard

  2:          0          XT-PIC  cascade

  8:          3    IO-APIC-edge  rtc

 14:      72582    IO-APIC-edge  ide0

 16:      81197   IO-APIC-level  eth0

 17:   54874555   IO-APIC-level  wcfxo

 20:   54874082   IO-APIC-level  wcfxo

 22:   54174464   IO-APIC-level  wctdm

NMI:          0

LOC:    5542842

ERR:          0

MIS:          0

 

 

 

When I run modprobe wcfxo I get the following error:

 

ZT_CHANCONFIG failed on channel 3: No such device or address (6)

/lib/modules/2.4.26/misc/wcfxo.o: post-install wcfxo failed

/lib/modules/2.4.26/misc/wcfxo.o: insmod wcfxo failed

 

 

After running modprobe wcfxs, the asterisk machine runs fine and ztcfg
doesn't complain.  

 

I tried moving cards to different slots but the error didn't go away.

If I remark out the fxoks=3 line the error goes away

If I reverse the load order in zaptel.conf and fire up the zaptel
modules (in reverse), I stop getting the error.  

 

So my question is why does the wcfxo try to fire up my TDM400 and is
this error a problem?

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040504/9e20b15f/attachment.htm