[Asterisk-Users] setting up 7940

[Simon Brown]

The password has to match what you have in sip.conf

Simon 

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Roger
Sent: Thursday, 1 April 2004 4:03
To: asterisk-users at lists.digium.com
Subject: Re: [Asterisk-Users] setting up 7940

Simon Brown wrote:

>Make sure that you have the following (or equivalent in the 
>SIP<mac_addr>.conf # Line 1 appearance
>line1_name: 202
># Line 1 Registration Authentication
>line1_authname: "202"
># Line 1 Registration Password
>line1_password: "202" 
>
>and this in the SIPDefault.conf
># Proxy Registration (0-disable (default), 1-enable)
>proxy_register: 1
>
>  
>
I'm a little confused at the password 202 - the only password I've managed to
get working is the default password of 'cisco'.  I tried those settings in
the below files and the password 202 didn't work, changed the password to
cisco

Doing a

*CLI> sip show users
Username         Secret           Authen           Def.Context      A/C
202              202              md5,plaintext    from-sip         No

Shows that it'll uses the password 202

---------------------------------
sip.conf
[202]
type=friend ; This device takes and makes calls host=dynamic ; This host is
not on the same IP addr every time
username=202 ; Username programmed into Cisco phone
secret=202 ; Password for device
context=from-sip        ; Inbound calls from this phone go to this context
nat=yes ; nat=yes if this phone is behind a NAT box or firewall
callgroup=2 ; the group to which this phone belongs for *8 phone ringing
pickup
pickupgroup=2 ; the pickup group allowed from this phone when *8 is dialed
mailbox=202             ; Activate the message waiting light if this 
voicemailbox has messages in it
---------------------------------

---------------------------------
SIPDefault.cnf
# SIP Default Generic Configuration File

# Image Version
image_version: P0S3-06-3-00

# Proxy Registration (0-disable (default), 1-enable)
proxy_register: 1
---------------------------------

---------------------------------
SIP000A8A490A3D.cnf

# Image Version
image_version: P0S3-06-3-00

; phone-specific configuration file sample ; Line 1 phone number line1_name :
202 ; Line 1 name for authentication with proxy server line1_authname : 202 ;
Line 1 authentication name password line1_password : 202
---------------------------------

---------------------------------
extensions.conf
exten => 202,1,Dial(SIP/202,15,t) ; see "show application dial" for options
and formats exten => 202,2,Voicemail2(u202) ; go to Voicemail2 if phone is
"U"nanswered exten => 202,102,Voicemail2(b202)  ; go to Voicemail2 if phone
is "B"usy exten => 202,103,Hangup ; and then hangup.
---------------------------------

At the top of the display is does say "202Sip".  So some of this config
works....
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



-----
This mail was content checked for malicious code and viruses
by GFI MailSecurity.