[Asterisk-Users] (no subject)

[Michael Manousos]

Hi,

Mireia Munoz de jesus wrote:
> Hi!
> 
> I have a little big problem here. I have an gateway(asterisk,working as a H.323
> - SIP gateway) conected to a gatekeeper (two different servers), and also a
> gateway (cisco - PSTN) conected to the same gatekeeper. When I make a call from
> the gateway(cisco) to a sip phone, the phone rings, but when I pick up the
> phone it sounds like it is busy on both sides. 
> 
> When I call from SIP to a PSTN phone, I have the next error on written on CLI:
>  
> -- Executing Dial("SIP/03316410-a668", "OH323/483317839|20|t|T") in new stack

First, this should be:
Dial(OH323/483317839|20|tT) not
Dial(OH323/483317839|20|t|T)

> [2]WrapperAPI::h323_make_call: Making call.
> [2]WrapMutex::Wait: Requesting mutex callMutex [wrapendpoint.cxx, 269, MakeCall]
> [2]WrapMutex::Wait: Got mutex callMutex [wrapendpoint.cxx, 269, MakeCall]
> [2]WrapH323EndPoint::MakeCall: Making call to 483317839
> [3]WrapH323Connection::WrapH323Connection: Outgoing capability
> G.711-uLaw-64k{hw}
> [3]WrapH323Connection::WrapH323Connection: Caller ID name on outgoing call
> Felippe
> [3]WrapH323Connection::WrapH323Connection: LocalPartyName Felippe
> [3]WrapH323Connection::WrapH323Connection: DestExtraCallInfo
> [3]WrapH323Connection::WrapH323Connection: Caller ID on outgoing call 03316410
> [3]WrapH323EndPoint::MakeCall: Call token is ip$localhost/5074
> [3]WrapH323EndPoint::MakeCall: Call reference is 5074
> [2]WrapMutex::Signal: Released mutex callMutex [wrapendpoint.cxx, 320, MakeCall]
> [2]WrapH323Connection::OnSendSignalSetup: Sending SETUP message...
> [3]WrapH323Connection::OnSendSignalSetup: Setting display name Felippe
> [3]WrapH323Connection::OnSendSignalSetup: Setting calling party number 03316410
> [2]WrapH323Connection::OnReceivedReleaseComplete: Received RELEASE COMPLETE
> message [ip$localhost/5074]
> [2]WrapH323EndPoint::ClearCall: Request to clear call [ip$localhost/5074]
> [2]WrapH323EndPoint::ClearCall: Request to clear call [ip$localhost/5074]
> [2]WrapH323EndPoint::ClearCall: Request to clear call [ip$localhost/5074]
> [2]WrapH323EndPoint::OnConnectionCleared: Connection [ip$localhost/5074] closed.

It looks like a codec conflict. Are you sure that G.711 is allowed
by the remote Cisco?

> [2]WrapMutex::Wait: Requesting mutex channelMutex [wrapendpoint.cxx, 967,
> OnConnectionCleared]
> [2]WrapMutex::Wait: Got mutex channelMutex [wrapendpoint.cxx, 967,
> OnConnectionCleared]
> [2]WrapH323EndPoint::OnConnectionCleared: Call with "150.xxx.xxx.xxx" completed
> [2]WrapMutex::Signal: Released mutex channelMutex [wrapendpoint.cxx, 1047,
> OnConnectionCleared]
> Mar 31 10:39:58 ERROR[311316]: chan_oh323.c:1135 oh323_call: OH323/L0: Could not
> call 483317839.
>     -- Couldn't call 483317839
> [2]WrapperAPI::h323_clear_call: Clearing call.
> [3]ClearCallThread::ClearCallThread: Unblock pipe - 46, 47
>     -- Hungup 'OH323/L0'
>   == Everyone is busy at this time 
> 
> ANyone has any idea of what is going on?
> 
> Best Regards,
> 
> Mireia

Michael.