[Asterisk-Users] (no subject)

[Mireia Munoz de jesus]

Hi!

I have a little big problem here. I have an gateway(asterisk,working as a H.323
- SIP gateway) conected to a gatekeeper (two different servers), and also a
gateway (cisco - PSTN) conected to the same gatekeeper. When I make a call from
the gateway(cisco) to a sip phone, the phone rings, but when I pick up the
phone it sounds like it is busy on both sides. 

When I call from SIP to a PSTN phone, I have the next error on written on CLI:
 
-- Executing Dial("SIP/03316410-a668", "OH323/483317839|20|t|T") in new stack
[2]WrapperAPI::h323_make_call: Making call.
[2]WrapMutex::Wait: Requesting mutex callMutex [wrapendpoint.cxx, 269, MakeCall]
[2]WrapMutex::Wait: Got mutex callMutex [wrapendpoint.cxx, 269, MakeCall]
[2]WrapH323EndPoint::MakeCall: Making call to 483317839
[3]WrapH323Connection::WrapH323Connection: Outgoing capability
G.711-uLaw-64k{hw}
[3]WrapH323Connection::WrapH323Connection: Caller ID name on outgoing call
Felippe
[3]WrapH323Connection::WrapH323Connection: LocalPartyName Felippe
[3]WrapH323Connection::WrapH323Connection: DestExtraCallInfo
[3]WrapH323Connection::WrapH323Connection: Caller ID on outgoing call 03316410
[3]WrapH323EndPoint::MakeCall: Call token is ip$localhost/5074
[3]WrapH323EndPoint::MakeCall: Call reference is 5074
[2]WrapMutex::Signal: Released mutex callMutex [wrapendpoint.cxx, 320, MakeCall]
[2]WrapH323Connection::OnSendSignalSetup: Sending SETUP message...
[3]WrapH323Connection::OnSendSignalSetup: Setting display name Felippe
[3]WrapH323Connection::OnSendSignalSetup: Setting calling party number 03316410
[2]WrapH323Connection::OnReceivedReleaseComplete: Received RELEASE COMPLETE
message [ip$localhost/5074]
[2]WrapH323EndPoint::ClearCall: Request to clear call [ip$localhost/5074]
[2]WrapH323EndPoint::ClearCall: Request to clear call [ip$localhost/5074]
[2]WrapH323EndPoint::ClearCall: Request to clear call [ip$localhost/5074]
[2]WrapH323EndPoint::OnConnectionCleared: Connection [ip$localhost/5074] closed.
[2]WrapMutex::Wait: Requesting mutex channelMutex [wrapendpoint.cxx, 967,
OnConnectionCleared]
[2]WrapMutex::Wait: Got mutex channelMutex [wrapendpoint.cxx, 967,
OnConnectionCleared]
[2]WrapH323EndPoint::OnConnectionCleared: Call with "150.xxx.xxx.xxx" completed
[2]WrapMutex::Signal: Released mutex channelMutex [wrapendpoint.cxx, 1047,
OnConnectionCleared]
Mar 31 10:39:58 ERROR[311316]: chan_oh323.c:1135 oh323_call: OH323/L0: Could not
call 483317839.
    -- Couldn't call 483317839
[2]WrapperAPI::h323_clear_call: Clearing call.
[3]ClearCallThread::ClearCallThread: Unblock pipe - 46, 47
    -- Hungup 'OH323/L0'
  == Everyone is busy at this time 

ANyone has any idea of what is going on?

Best Regards,

Mireia