AW: [Asterisk-Users] CAPI problems when loading chan_capi.so

[Martin Mielke]

Hallo Sacha, :-P


Sascha Knific wrote:

>Hi
>
>  
>
>>capiinfo gives:
>>---
>>capi not installed - No such device or address (6)
>>---
>>    
>>
>
>It´s not just about installing the apropriate package but you have to load
>the capi kernel module for your isdn card.
>
>The module to load on boot time is set in /etc/isdn/capi.conf (on Debian).
>You have to check how it´s done on your distro (I presume RedHat or SuSE).
>  
>

I use SuSE 9.0 Pro.
I don't see any capi.conf - the only similar thing is 
/etc/capisuite/capisuite.conf but I don't know if we're talking about 
the same file...

The module is loaded at system boot:
---
pbx:~ # dmesg  | grep -i capi
capifs: Rev 1.1.4.1
CAPI-driver Rev 1.1.4.1: loaded
capi20: started up with major 68
kcapi: capi20 attached
capi20: Rev 1.1.4.2: started up with major 68 (middleware+capifs)
---

I hope it's the right one...

>You can load the module manually. For a AVM Fritz!Card PCI you would do:
>"modprobe fcpci"
>  
>

The system has an Eicon Diva Server BRI 2M... and by now I can't find an 
specific module...


Martin