[Asterisk-Users] setting up 7940

[Roger]

I'm starting out w/ a Cisco 7940, running the Sip image version 6.3.  
I've downloaded/installed asterisk via cvs.

I've set the phone up to get its info via dhcp - the dhcp, tftp, 
astericks box & phone are on the same network.  I've gone through and 
setup a test account per the instructions @

http://voip-info.org/wiki-Asterisk+phone+cisco+79xx

but time I do a

sip show peers

*CLI> sip show peers
Name/username    Host                 Mask             Port     Status
3014/3014        (Unspecified)   (D)  255.255.255.255  0        Unmonitored

I get this.  Also the cisco phone says "phone unprovisioned".  I've 
tried telneting to the phone, but it looks like I'm in user mode, can't 
setup a username/password.  So far I've just be able to log in using the 
default username/password

I've put the following

# Telnet Level (enable or disable the ability to telnet into the phone)
telnet_level : 2                 ; 0-Disabled (default), 1-Enabled, 
2-Privileged

in the SIP<mac addy>.cnf on the tftp server thinking that this would 
help but I still can't setup a username/password combo.

The quick-start guide

http://www.voip-info.org/wiki-Asterisk+quickstart

I got lost between creating a sip account and the demo.....

Just need some help getting off the ground w/ my 7940