[Asterisk-Users] 'Busy tone' after hangup

Ryan Courtnage ryan at coalescentsystems.ca
Mon Mar 29 15:20:04 MST 2004


I find that when 2 extensions are connected, and one of the extensions 
hangs up on the call, the other will receive a busy signal (as if to 
indicate that the call is over).

Does this sound like a config problem, or is it the default behavior of 


exten => 111,1,Dial(SIP/2001)
exten => 111,2,Hangup
exten => h,1,Hangup

Zap/2 dials 111:
     -- Starting simple switch on 'Zap/2-1'
     -- Executing Dial("Zap/2-1", "SIP/2001") in new stack
     -- Called 2001
     -- SIP/2001-b164 is ringing
     -- SIP/2001-b164 answered Zap/2-1

After SIP/2001 hangs up:
     -- Executing Hangup("Zap/2-1", "") in new stack
     -- Hungup 'Zap/2-1'

... followed by Zap/2 getting a "beep-beep-beep-..." 'busy tone'.

If this is the default behavior, can it be changed?  After the remote 
end hangs-up on a call, I'd expect to hear either dialtone or silence.


More information about the asterisk-users mailing list