[Asterisk-Users] Distinctive Ring Detection On incoming calls

[Duane]

I've got a single inbound analogue line setup with 2 phone numbers and 
distinctive ring and I'm trying to setup distinctive ring detection to 
separate calls and put a distinctive ring to the extensions based on 
what number was called...

Problem is it seems most countries send a distinctive ring then the 
caller ID, however here it appears a short ~50ms ring is sent, followed 
by a pause with caller ID *then* the proper ring/distinctive ring is 
sent, is there any simple way to get asterisk to ignore trying to match 
a distinctive ring with the first 50ms segment, and do it on the 2nd 
segment instead?

Needless to say it was showing up as 0,0,0 ever time no matter which 
phone number was called...

Both myself and a friend have tried coding in methods to shorten rings 
and flags to try and make asterisk try to set a context for the call on 
the first ring but this doesn't seem to work and it still gets passed 
off... Any help would be greatly appreciated...

-- 
Best regards,
  Duane

http://www.cacert.org - Free Security Certificates
http://www.nodedb.com - Think globally, network locally
http://www.sydneywireless.com - Telecommunications Freedom
http://happysnapper.com.au - Sell your photos over the net!