[Asterisk-Users] Sipura line 1 outgoing voice problem?

[Nicolas Gudino]

Maybe this helps. I have 4 sipuras on the same network as Asterisk. I had to
make sure each line on the sipura uses a different sip port: 5060/5061 on
the first one, 5062/5063 on the second, and so on.
Best regards,

----- Original Message ----- 
From: Matt McIntyre
To: asterisk-users at lists.digium.com
Sent: Tuesday, March 23, 2004 6:59 PM
Subject: RE: [Asterisk-Users] Sipura line 1 outgoing voice problem?


I am experiencing this same problem and was wondering if anyone has come to
a resolution.  I have contacted Sipura but have not heard any response yet
and am having trouble determining for sure whether the problem resides with
Asterisk or the Sipura.  As I have noticed that there are many users on the
list who use the Sipura unit without this problem (and even a fellow with
one unit that worked and one that did) I think the Sipura must be suspect.

__________________
Back in January I started having a problem with my Sipura (and there was
at least one other on the list with the same problem) that if I answer
an incoming call (via X100P) on line 1 of my Sipura, the caller cannot
hear any voice from the internal extension.  If the internal user puts
the external user on hold (via flash hook) and returns, both directions
of audio are fine.

Line 2 never has had this problem.  For the meantime, I switched the
internal phones so that my wife's favorite phone is line 2 and I told
her to not pick up with line 1.  Not a very permanent solution :)