[Asterisk-Users] Can i do voice chat without using the hardware

[suresh kumar]

Hi Michael,

Thanks a lot for your help.
I can see the four files when i untar the iaxComm. 
How can i get the *CLI prompt?
Is it possible to uninstall the asterisk package?
If so, how can i uninstall so that i can configure
asterisk with iaxComm.

Thanks & Regards,
Suresh


--- Michael Van Donselaar <mvand at vandonselaar.org>
wrote:
> On Mon, 22 Mar 2004 06:31:00 -0800 (PST), suresh
> kumar <idcsureshp at yahoo.com>
> wrote:
> 
> >Hi,
> >
> PLEASE STOP YELLING
> 
> >INSTALLED ASTERISK PROPERLY AND WORKS FINE. AFTER I
> >MADE A WRONG DECISION TO INSTALL iaxComm in the
> >Client, it's created problem. When i type asterisk
> -r
> >command, Now i got display as
> >[root at edventure17 asterisk]# asterisk -r
> >Asterisk CVS-03/18/04-18:01:45, Copyright (C)
> >1999-2004 Digium.
> >Written by Mark Spencer <markster at digium.com>
>
>=========================================================================
> >Connected to Asterisk CVS-03/18/04-18:01:45
> currently
> >running on edventure17 (pid = 4462)
> >edventure17*CLI>
>  ^^^^^^^^^^^^^^^^  *is* the command prompt
> 
> >WHY I AM NOT GETTING *CLI prompt? "edventure12" i
> gave
> >when registering the iaxComm. How can i get back
> *CLI
> >prompt?
> 
> You *do* have a command prompt.
> 
> "Installing" iaxComm did not break anything.  When
> you untar the tar file, you
> get an executable, two text files called QUICKSTART
> and README and a 16 bit pcm
> file called ringtone.raw.  No shared libraries.  No
> changes to any .conf files
> 
> When run, iaxComm creates a lockfile ~/iaxComm.lock
> to prevent two instances
> from running at the same time.  It also creates a
> config file of its own,
> ~/.iaxComm.  Neither of these files will conflict
> with asxterisk in any way.
> 
> >                                                   
>   
> >                                                   
>   
> >               
> >I am using an on board sound card. HOW CAN I CHECK
> >WHETHER IT'S CONFIGURED OR NOT?
> >                                                   
>   
> >                                                   
>   
> >               
> >I'm also assuming that you still have the default
> >extensions.conf.   If
> >so, you should be able to type dial 600
> >                                                   
>   
> >                                                   
>   
> >               
> >YES ... I didn't change the default
> extensions.conf.
> >If i type dial 600 in edventure17*CLI prompt,
> getting
> >display as " No such command 'dial' (type 'help'
> for
> >help)".
> 
> I think this is a result of asterisk not recognizing
> your sound card
> 
> >So i type "reload" in edventure17*CLI prompt and
> enter
> >the key. Then i type dial 600 , i got
> edventure17*CLI
> >prompt.
> >Is there anything wrong with my configuration?
> >If it's wrong, How to fix that?
> >
> >
> >Now what can i do to get back to the asterisk
> solution
> >part. I am not able to continue ...
> >PLease advice me what can i do in this stage.
> >
> >Thanks & Regards,
> >Suresh 
> >
> >
> >wrote:
> ><snip>
> >>I would like to get some help from you.
> >>My server ip is 192.168.1.1 and i would like to
> >>connect to another ip 192.168.1.2. So how can i
> >>specify the ip 192.168.1.2 so that make a call
> from
> >>192.168.1.1?
> >                                                   
>   
> >                                                   
>   
> >               
> >>Basic configuration is described in the QUICKSTART
> >>that came with the binary.
> >>But, since you want to originate calls from the
> >>asterisk server, that's a bit different.
> >                                                   
>   
> >                                                   
>   
> >               
> >>I'm assuming that you have asterisk installed and
> >>working with your sound card.
> >                                                   
>   
> >                                                   
>   
> >               
> >>I'm also assuming that you still have the default
> >>extensions.conf.   If so, you should be able to
> type
> >>dial 600
> >                                                   
>   
> >                                                   
>   
> >               
> >YES ... I didn't change the default
> extensions.conf.
> >If i type dial 600 in edventure17*CLI prompt,
> getting
> >display as " No such command 'dial' (type 'help'
> for
> >help)".
> >So i type "reload" in edventure17*CLI prompt and
> enter
> >the key. Then i type dial 600 , i got
> edventure17*CLI
> >prompt.
> >If it's wrong, How to fix that?
> >                                                   
>   
> >                                                   
>   
> >               
> >>at the CLI prompt and get the echo test.  If not,
> >>you'll have to get that fixed before going
> further.
> >                                                   
>   
> >                                                   
>   
> >               
> >>If you can dial extensions from the console OK,
> then
> >>just
> >                                                   
>   
> >                                                   
>   
> >               
> >>1.  Make and iax.conf entry for an extension
> >                                                   
>   
> >                                                   
>   
> >               
> >>[101]
> >>type=friend
> >>host=dynamic
> >>secret=foo
> >>context=default
> >>callerid="Remote PC" <101>
> >>diasallow=all
> >>allow=gsm
> >                                                   
>   
> >                                                   
>   
> >               
> >>2.  Make an extensions.conf  entry for that
> extension
> >>in the default context
> >                                                   
>   
> >                                                   
>   
> >               
> >>exten => 101,1,Dial(IAX2/101)
> >                                                   
>   
> >                                                   
>   
> >               
> >>3.  Configure iaxComm on the other machine to use
> the
> 
=== message truncated ===


__________________________________
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.
http://taxes.yahoo.com/filing.html