[Asterisk-Users] From 0 to PBX in 2 hours

[hank]

what is your easy start up guide?
----- Original Message -----
From: <amg at intercable.com.ve>
To: <asterisk-users at lists.digium.com>
Sent: Tuesday, March 09, 2004 12:16 PM
Subject: [Asterisk-Users] From 0 to PBX in 2 hours


>
> Hi everyone,
>
> As an newbie in * and knowing how hard Linux can be for starters (more if
> you come from the world of MSwindows.), I triyed  a way to teach my
> co-workers how to deploy fast and in less than two hours a small but
> perfect working PBX.
>
> I used the following equipment:
>
> 1 Clarent CPG 101 (A.K.A. D-link 104s) 4 FXS ports
> 1 PC Celeron 500Mhz 128MB Ram
>
> The following software:
> 1 Mepis Installation CD,
>
> and a cable Internet link.
>
> Booted up the computer with the Mepis (Debian based) CD, installed Linux
in
> the Hard disk, 15 minutes or less. Updated the firmware and the boot prom
> to  versions 3.0B35-C and 3.0B14-C in the Clarents respectively, runned
> apt-get install asterisk, and then begun to figure out how to configure
the
> mgcp gateways. So far whe have deployed in two days 5 locations and
> starting to connect Barquisimeto, Venezuela, with Buenos Aires, Argentina.
>
> Hope that helps someone and encourage others to start in this great world
> of telecomunications
>
> AMG
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users