[Asterisk-Users] x100p volume

[Rich Adamson]

> Calls to the pstn on our x100p experience a very low volume. Any parameters
> to change this ?

Here's my zapata.conf:

; This is the incoming Business line X100P card
context=bus-ivr-main
switchtype=national
signalling=fxs_ks
echotraining=yes
usecallerid=yes
hidecallerid=no
callwaiting=yes
callwaitingcallerid=no
threewaycalling=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=-0.0
txgain=-0.0
callgroup=2
immediate=no
callprogress=no
musiconhold=default
channel => 2

Notice the rxgain and txgain. Change the values where -3.0 is low volume
and +3.0 is a higher volume. Understand, however, that changing these
values will likely impact the amount of echo you have to put up with
to some degree.

Rich