[Asterisk-Users] wct1xxp module and the T100P

[Steven Critchfield]

On Wed, 2004-03-03 at 17:01, cveazey at blackhillsfiber.com wrote:
> I'm having trouble turning up a PRI to a T100P.  I've read on the
> Digium FAQ's that once the wct1xxp module is loaded correctly, the LED
> on the T100P will flash red.  I believe I've loaded the module
> correctly because both wct1xxp and zaptel are listed when I do the
> "lsmod" command.  The LED on the card does not flash on and off.  Does
> anyone have any recommendations on what I could be doing wrong?

Could be wrong or bad cable, could be incorrect configuration, could be
no service on the line yet.

Must provide data to get information.
-- 
Steven Critchfield  <critch at basesys.com>