[Asterisk-Users] E100P UK PRI Configuration

[Michael Bielicki]

check with bt what kind of dialplan they use and set it with pridialplan= in 
zapata.conf

On Wednesday 03 of March 2004 22:08, Michael East wrote:
> fine and the are no alarms on back of card or in
> /proc/zaptel/1, but with outgoing calls,
> all numbers are rejected with the BT error "The number you have dialed has
> not been recognized, please check and try again"
>
> Outgoing calls work fine though the SDX when the PRI is unplugged from the
> asterisk server and plugged back into the SDX, so it rules out a problem
> with the PRI.
>
> I think I have misconfigured somthing somewhere, anyone got any ideas ?
>
> Below are the zapata/zaptel configs we are using
>
> zaptel.conf
> span=1-8,1,0,ccs,hdb3,crc4
> indclear=1-15
> dchan=16
> indclear=17-31
> defaultzone=uk
>
> zapata.conf
> [channels]
> callwaiting=no
> threewaycalling=no
> transfer=yes
> cancallforward=yes
> echocancel=yes
> echocancelwhenbridged=yes
> echotraining=yes
> rxgain=0.0
> txgain=0.0
> switchtype=euroisdn
> callerid = asreceived
> group=1
> context=default
> signalling=pri_cpe
> channel = 1-8
>
> Regards,