[Asterisk-Users] Sipura 2000 not ringing.

[SamW]

Did you try to upgrade the firmware?, some issues we saw with rtp
stream, went away after a firmware upgrade.

http://www.sipura.com

-SamW



-----Original Message-----
From: Mark Messmore, Technical Support, University Telcom Inc.
[mailto:mark at utionline.net] 
Sent: Tuesday, March 02, 2004 1:59 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] Sipura 2000 not ringing.

I was just wondering if anyone has had this situation...or one similar
to it.  

I've got a Sipura SPA 2000.  After hooking it up and configuring it with
my * box, it has worked well.  From both lines we are able to dial out
at any point in time.  However after a few minutes (5-10 usually) the
Sipura will stop sending a ringer signal to the phones.  We can still
dial, * shows that it is ringing those SIP clients, and both lines are
still shown as being "registered".  Everything will work fine for the
first 5-10 minutes after being "rebooted"...however after that there is
silence.  Even if I dial the line from my cell phone and pick up the
telephone that I am dialing...there is dial-tone...therefore it seems
that the Sipura is just not passing those incoming calls after a short
time period.  

If you have any idea why this is happening I'd sure appreciate hearing
your thoughts.  Thanks

Mark

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users