[Asterisk-Users] 7960 switch port / vlan issue

lists lists at efastfunding.com
Fri Jun 11 06:48:11 MST 2004

This direcly from my 3550-24pwr switch
Once you do auto qos voip cisco-phone the below wrr-queue will all be build 
My data is on vlan 1 but you can add a switchport access vlan XX for another
vlan for data

Hope this helps

interface FastEthernet0/2
 switchport trunk encapsulation dot1q
 switchport voice vlan 66
 no ip address
 mls qos trust device cisco-phone
 mls qos trust cos
 auto qos voip cisco-phone
 wrr-queue bandwidth 20 1 80 0
 wrr-queue min-reserve 1 5
 wrr-queue min-reserve 2 6
 wrr-queue min-reserve 3 7
 wrr-queue min-reserve 4 8
 wrr-queue cos-map 1 0 1 2 4
 wrr-queue cos-map 3 3 6 7
 wrr-queue cos-map 4 5
 priority-queue out
 spanning-tree portfast

Doug Block
Chief Information Officer of Efast Funding
713-983-4055 (Direct)
888-338-3863 x 4055 (Toll Free)

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Joseph
Sent: Friday, June 11, 2004 4:48 AM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] 7960 switch port / vlan issue

Using a cisco switch with PoE and a cisco 7960 phone:

In setting up some test setups, I would like to make the 7960 phone work 
in line with the pc
or as a switch allowing the pc and phone to work on the same cable.

Assuming I wanted to make the pc use vlan10 and the phone vlan15, does 
anyone have an example of
how to set this up?

Here is my attempt in the IOS:

interface FastEthernet0/10
 switchport access vlan 10
 switchport voice vlan 15

The pc part worked fine but the phone could not seem to pull an ip. Removing
the voice part and the pc data cable with just the access vlan 
statement it works fine on
the access vlan.


Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
To UNSUBSCRIBE or update options visit:

More information about the asterisk-users mailing list