[Asterisk-Users] miserable time with Cisco ATA186

Eric Wieling eric at fnords.org
Fri Jun 4 11:24:01 MST 2004


Why in the world would he want to do that????  You are assuming he has a
G729 license.

On Fri, 2004-06-04 at 12:33, Erick Weber V. wrote:
> also you have to set the sip.conf on the ATA sittings to disallow=all,
> allow=g729  OR set the txcodec and rxcodec to 3 on the ATA
> ----- Original Message ----- 
> From: "Matthew Simpson" <matthew at symatec-computer.com>
> To: <asterisk-users at lists.digium.com>
> Sent: Friday, June 04, 2004 8:52 AM
> Subject: Re: [Asterisk-Users] miserable time with Cisco ATA186
> 
> 
> > If I turn allow=ulaw on only, asterisk tries to use it
> >
> > a=rtpmap:0 PCMU/8000
> >
> > but the ATA says it doesn't have it:
> >
> > Answering/Requesting with root capability 4
> > Answering with non-codec capability 0x1(G723)
> >
> > If I turn allow=alaw on only or with allow=ulaw, asterisk sends it, the
> ATA
> > says it has it [alaw], but it still won't negotiate it.
> >
> > I think the stupid ATA is just determined to use G723 no matter what... I
> > have LBRCodec set to 3 which should have it try to use G729, but it still
> > tries to use G723.  The AudioMode setting has a parameter bit to "Enable
> > G711 only", but I'm not sure how that bit thing works.  Either the default
> > 0x00150015 or the recommended 0x00140014 fails.  [btw, bit 1 should be "1"
> > to enable G711 only, if someone can help me there].
> >
> > I'm seriously about to punt this thing into the garbage.
> >
> > Help!
> >
> > thanks,
> > matt
> >
> > > From: "Timothy R. McKee" <tim at baseworx.net>
> > > To: <asterisk-users at lists.digium.com>
> > > Subject: RE: [Asterisk-Users] miserable time with Cisco ATA186
> > > Date: Fri, 4 Jun 2004 00:04:22 -0400
> > > Reply-To: asterisk-users at lists.digium.com
> > >
> > > Noticed that he has ALAW set as the preferred codec on the ATA.  I'd
> > suggest
> > > testing with allow of ulaw only, then try turning on other codecs.  We
> > know
> > > that one works well.
> > >
> > >
> > >
> > > ====================================================================
> > > Timothy R. McKee
> > >
> > >
> > > -----Original Message-----
> > > From: asterisk-users-admin at lists.digium.com
> > > [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Eric Wieling
> > > Sent: Thursday, June 03, 2004 23:36
> > > To: asterisk-users at lists.digium.com
> > > Subject: Re: [Asterisk-Users] miserable time with Cisco ATA186
> > >
> > > Perhaps, but *I* at least had decent luck with 2.16.1.  I suspect he has
> > > allow=all and the codec that ends up being used is G723.1 and then, of
> > > course, everything goes to hell.
> > >
> > >
> > > On Thu, 2004-06-03 at 22:59, brian k. west wrote:
> > > > because 2.16.1 has some bugs.. you need 2.16.2 or higher.
> > > >
> > > > bkw
> > > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
          Eric Wieling * BTEL Consulting * 504-899-1387 x2111
"In a related story, the IRS has recently ruled that the cost of Windows
upgrades can NOT be deducted as a gambling loss."




More information about the asterisk-users mailing list