[Asterisk-Users] Zapata FXO always answers call?

[Steven Critchfield]

your using an analog adapter. We cover this regularly. You need
callprogress detection since you don't have a reliable way of doing it
via the analog adapter. 

On Wed, 2004-06-02 at 14:09, Gelson Dias Santos wrote:
> 	I have some X100P connected to my analog PBX. When I want to call an 
> analog extension on that PBX I use the following rule:
> 
> exten => _21XX,1,Dial(Zap/g1/${EXTEN:2},20)
> 
> 	where 21 is just a prefix to indicate it´s an analog extension and XX 
> matches the real two digit extension number. (this is why I strip of two 
> digits when dialing Zap/g1. Well, everything works fine, except that * 
> says on the log that the call was answered, even if it´s still ringing.
> 	The problem is that now I want to set up voicemail to those analog 
> extensions, but since * says it "answered on first ring" it never goes 
> to the next priority, where voicemail is called.
> 	I tried callprogress=yes on zapata.conf but it has no effect. Here is a 
> tipical log from a call I have _not_ answered:
> 
>      -- Executing Dial("SIP/2000-a638", "Zap/g1/32|20") in new stack
>      -- Called g1/32
>      -- Zap/1-1 answered SIP/2000-a638
> 
> 	I´m runnign 0.9.0 from the tar archive. Is this a known bug? Is there a 
> workaround for it?
> 
> 	Gelson
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Steven Critchfield  <critch at basesys.com>