[Asterisk-Users] Connecting Asterisk and Avaya Definity By E1 . Incoming work, but not outgoing

[Ken Godee]

Roman Bessyadovskii wrote:

> Yes, I can make a call on that extension from other definity phone, if you
> mean it.
> 
> -----Original Message-----
> From: Ken Godee [mailto:ken at perfect-image.com] 
> Sent: 30 ÉÀÌÑ 2004 Ç. 19:14
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] Connecting Asterisk and Avaya Definity By E1.
> Incoming work, but not outgoing
> 
> Roman Bessyadovskii wrote:
> 
> 
>>Hi All.
>>
>>I connect asterisk and definity by manual at
>>www.voip-info.org/tiki-index.php?page=Asterisk%20Avaya.
>>(I just only have E1, not T1 card).
>>
>>I see, that card work (in definity trunk status, and at asterisk
>>
>>Incoming call, from definity is work ok, but when I try outgoing call, I
>>recive
>>
>>  -- Executing Dial("SIP/1015-870f", "Zap/g1/2073") in new stack
>>    -- Called g1/2073
>>    -- Channel 1, span 1 got hangup
>>    -- Hungup 'Zap/1-1'
>>  == No one is available to answer at this time
>>
>>How fix it?
> 
> 
> Do you have the "Dial Plan" set up properly
> on the Definity side?
> 

No, that's not what I mean.

You must understand how the "Dial plan" is used in the Definity.

Are all your extensions on the Definity 4 digits starting with a 2?

If you do not have first digit "2", length "4", type "extension"
set up in the dial plan, Definity will not know what to do with the four 
digits your sending into the switch.

do a "display dialplan" and make sure it is set up correctly.