[Asterisk-Users] Iax unable to transfer

[Roy Eddleston]

Dimitri

Did you get a resolution to this problem? I am seeing the same, my * box
talks to Telappliant using AIX, anybody else seen this?

Roy.. 

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> admin at lists.digium.com] On Behalf Of reseaux
> Sent: 23 June 2004 10:47
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] Iax unable to transfer
> 
> Dear List
> 	I have notice this kind of problem between my two * box.
> My scenario is :
> 				    Iax GSM
> IaxClient----->PBX1------------>PBX2-->TDM
> 			today CVS		Stable V1
> 
> I use as Client FireFly with IAX2/GSM and try to call my PBX1 this
server call
> PBX2 to terminate the call trought a TDM line (TE410P) but after PBX2
join
> the two call i can see the log below from my PBX1, i can speak for few
second
> and after the FireFly hangup.
> I have try to change * version from Stable to today CVS but no success
same
> problem.
> I have enabled the IAX Debug and seems the RX side (PBX1) dont accept
> something from PBX2 and show the "unable to transfer" (im not expert)
:-)
> 
> The strange thing is if i call from Sip Phone/client i dont have a
problem the
> Call is bridged!
> 
> The events from the CLI:
> ---------
> Executing Dial("IAX2[pippo2 at pippo2]/5",
> "IAX2/out:###@213.215.xxx.xxx/0012234456666 at outgoing|60|g") in new
stack
>     -- Called out:######@213.215.xx.xx/0012234456666 at outgoing
>     -- Call accepted by 213.215.xx.xx (format GSM)
>     -- Format for call is GSM
>     -- IAX2[out]/6 stopped sounds
>     -- IAX2[out]/6 is ringing
>     -- IAX2[out]/6 stopped sounds
>     -- IAX2[out]/6 answered IAX2[pippo2 at pippo2]/5
>     -- Attempting native bridge of IAX2[pippo2 at pippo2]/5 and
IAX2[out]/6
>     -- Channel 'IAX2[out]/6' unable to transfer
>     -- Hungup 'IAX2[out]/6'
>     -- Executing Hangup("IAX2[pippo2 at pippo2]/5", "") in new stack
>   == Spawn extension (incoming,0012234456666, 4) exited non-zero on
'IAX2
> [pippo2 at pippo2]/5'
>     -- Executing Hangup("IAX2[pippo2 at pippo2]/5", "") in new stack
> -----------
> 
> Thanks in advance for possible help!
> Dimitri
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users