[Asterisk-Users] FXS vs. FXO

[Shlomi Bachar]

Here is the output of the "status equipment" command :

BootCode Version:   1.23

 

         CardType   Status       SW Vers    CLEI

         --------   ------       -------    ----

SLOT A   T1x2       Present       6.1.2   SIC3DH0CAA

SLOT 1   FXSx8      Present        1.09   SIC3GJ0CAA

SLOT 2   FXSx8      Present        1.09   SIC3GJ0CAA

SLOT 3   FXS5Gx8    Present        1.10   SIC2780JAA

SLOT 4   FXSx8      Present        1.09   SIC3GJ0CAA

SLOT 5   FXSx8      Not Present

SLOT 6   V35x2      Not Present

 

- Shlomi

 

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Shlomi
Bachar
Sent: Sunday, July 25, 2004 4:23 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] FXS vs. FXO

 

Hello,

 

 I've recently purchased Adit 600 with 3FXS and 1FXO to be connected to
my * server via T100P card. This is the output of "status equipment"
command in the Adit600:

 

 

 For some reason the FXO card is seen as FXS, why? Is it ok? On the card
it is written "FXO".

 

Regards,

 Shlomi Bachar

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040725/cecc8492/attachment.htm