[Asterisk-Users] roblems with Junghanns QuadBri

[Edwig Knol]

I installed the QuadBri card in my * server.
I'm installing * on a RedHat 9 server
 
I run the install.sh file. So far no problems.
 
If I try to start /sbin/ztcfg -v -c /etc/zaptel.conf
 
I will see the following error:
 
Zaptel Configuration
======================
 
SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 3: CCS/ AMI Build-out: 399-533 feet (DSX-1)
SPAN 4: CCS/ AMI Build-out: 399-533 feet (DSX-1)
 
12 channels configured.
 
Notice: Configuration file is /etc/zaptel.conf
line 18: Unable to open master device '/dev/zap/ctl'
 
Does anybody know what I do wrong?
 
To be complete These are the configuration files:
 
[zaptel.conf]
loadzone=nl
defaultzone=nl
# qozap span definitions
# most of the values should be bogus because we are not really zaptel
span=1,1,3,ccs,ami
span=2,0,3,ccs,ami
span=3,0,3,ccs,ami
span=4,0,3,ccs,ami
 
bchan=1,2
dchan=3
bchan=4,5
dchan=6
bchan=7,8
dchan=9
bchan=10,11
dchan=12

[zapatel.conf]
[channels]
 
;
; ISDN quadBRI interfaces
;
 
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
group = 1
context=to-pstn
channel => 1-2
 
switchtype = euroisdn
signalling = bri_cpe_ptmp
pridialplan = local
group = 2
context=to-pstn
channel => 4-5

To me it looks all fine.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040721/f2dfb8c4/attachment.htm