[Asterisk-Users] x100p and two hfc isdn cards

[Tomaz]

aha ,

yes i try to put x100p out from box and everything is ok :) but once 
again .. put together slowly all 3 cards (2xhfc + 1 x100p)
and get working 2 hfc cards and loading x100p without any errors!

less /proc/zaptel/3
Span 3: WCFXO/0 "Wildcard X101P Board 1" RED

           7 WCFXO/0/0 FXSKS

but:
-- Executing Dial("SIP/101-f09f", "Zap/7/BYEXTENSION|130|t|r") in new stack
Jul  8 22:35:14 NOTICE[311316]: app_dial.c:559 dial_exec: Unable to 
create channel of type 'Zap'
  == Everyone is busy at this time

so anyone has maybe solution  to this  problem ? 
thankyou
 



clive18 at webmail.co.za wrote:

>hi
>
>I had the saem trouble, so I just took my x100p card out
>and the problem went away:)
>
>I know its not the ultimate solution, but I decided to use
>an ATA with my analgue phone instead.
>
>I would suggest trying to put the analogue lines as channel
>7 and the isdn lines as channels 1-6
>
>Good luck
>regards
>Clive
>
>
>
>
>On Thu, 08 Jul 2004 11:52:23 +0200
> Tomaz <izol at itt.nu> wrote:
>  
>
>>hello,
>>
>>i have a problem starting asterisk with one x100p digium
>>and two hfc chipset isdn cards with bri-stuff.0.0.2.
>>
>>
>>"ztcfg -vv" shows me a this  info:
>> 
>>
>>Zaptel Configuration
>>======================
>>
>>SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
>>
>>Channel map:
>>
>>Channel 01: FXS Kewlstart (Default) (Slaves: 01)
>>Channel 02: Individual Clear channel (Default) (Slaves:
>>02)
>>Channel 03: Individual Clear channel (Default) (Slaves:
>>03)
>>Channel 04: D-channel (Default) (Slaves: 04)
>>Channel 05: Individual Clear channel (Default) (Slaves:
>>05)
>>Channel 06: Individual Clear channel (Default) (Slaves:
>>06)
>>Channel 07: D-channel (Default) (Slaves: 07)
>>
>>7 channels configured.
>>
>>ZT_SPANCONFIG failed on span 1: Invalid argument (22)
>>
>>
>>    
>>
>-------------------------------------------------------------
>  
>
>>cat  /etc/zaptel.conf
>>
>>loadzone=nl
>>defaultzone=nl
>>fxsks=1
>>########################
>>loadzone=nl  defaultzone=nl
>>span=1,1,3,ccs,ami
>>bchan=2-3,5-6
>>dchan=4,7  
>>
>>and
>>
>># cat /etc/asterisk/zapata.conf
>>
>>[channels]
>>switchtype = euroisdn
>>; p2p TE mode
>>signalling = bri_cpe
>>;
>>prilocaldialplan=national
>>pridialplan = unknown
>>;
>>echocancel=yes
>>group = 1
>>context=isdn
>>channel => 2-3,5-6
>>
>>group = 2
>>context=gsm
>>signalling=fxs_ks
>>channel => 1
>>
>>---------------------------------------------
>>but when i start asterisk i got this errors:
>> 
>>Parsing '/etc/asterisk/zapata.conf': Found
>>Jul  8 13:53:58 WARNING[16384]: chan_zap.c:682 zt_open:
>>Unable to specify channel 2: No such device or address
>>Jul  8 13:53:58 ERROR[16384]: chan_zap.c:5397 mkintf:
>>Unable to open channel 2: No such device or address
>>here = 0, tmp->channel = 2, channel = 2
>>Jul  8 13:53:58 ERROR[16384]: chan_zap.c:7668 setup_zap:
>>Unable to register channel '2-3'
>>Jul  8 13:53:58 WARNING[16384]: loader.c:313
>>ast_load_resource: chan_zap.so: load_module failed,
>>returning -1
>>  == Unregistered channel type 'Tor'
>>  == Unregistered channel type 'Zap'
>>    -- Unregistered channel 1
>>Jul  8 13:53:58 WARNING[16384]: loader.c:408
>>load_modules: Loading module chan_zap.so failed!
>>Segmentation fault
>>
>>
>>what to do? i have latest CVS asterisk ..
>>thank you,
>>Tomaz
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>>
>>    
>>
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>_____________________________________________________________________
>For super low premiums ,click here http://www.dialdirect.co.za/quote
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>  
>