[Asterisk-Users] x100p and two hfc isdn cards

[clive18 at webmail.co.za]

hi

I had the saem trouble, so I just took my x100p card out
and the problem went away:)

I know its not the ultimate solution, but I decided to use
an ATA with my analgue phone instead.

I would suggest trying to put the analogue lines as channel
7 and the isdn lines as channels 1-6

Good luck
regards
Clive




On Thu, 08 Jul 2004 11:52:23 +0200
 Tomaz <izol at itt.nu> wrote:
> hello,
> 
> i have a problem starting asterisk with one x100p digium
> and two hfc chipset isdn cards with bri-stuff.0.0.2.
> 
> 
> "ztcfg -vv" shows me a this  info:
>  
> 
> Zaptel Configuration
> ======================
> 
> SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)
> 
> Channel map:
> 
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> Channel 02: Individual Clear channel (Default) (Slaves:
> 02)
> Channel 03: Individual Clear channel (Default) (Slaves:
> 03)
> Channel 04: D-channel (Default) (Slaves: 04)
> Channel 05: Individual Clear channel (Default) (Slaves:
> 05)
> Channel 06: Individual Clear channel (Default) (Slaves:
> 06)
> Channel 07: D-channel (Default) (Slaves: 07)
> 
> 7 channels configured.
> 
> ZT_SPANCONFIG failed on span 1: Invalid argument (22)
> 
>
-------------------------------------------------------------
> 
> cat  /etc/zaptel.conf
> 
> loadzone=nl
> defaultzone=nl
> fxsks=1
> ########################
> loadzone=nl  defaultzone=nl
> span=1,1,3,ccs,ami
> bchan=2-3,5-6
> dchan=4,7  
> 
> and
> 
> # cat /etc/asterisk/zapata.conf
> 
> [channels]
> switchtype = euroisdn
> ; p2p TE mode
> signalling = bri_cpe
> ;
> prilocaldialplan=national
> pridialplan = unknown
> ;
> echocancel=yes
> group = 1
> context=isdn
> channel => 2-3,5-6
> 
> group = 2
> context=gsm
> signalling=fxs_ks
> channel => 1
> 
> ---------------------------------------------
> but when i start asterisk i got this errors:
>  
> Parsing '/etc/asterisk/zapata.conf': Found
> Jul  8 13:53:58 WARNING[16384]: chan_zap.c:682 zt_open:
> Unable to specify channel 2: No such device or address
> Jul  8 13:53:58 ERROR[16384]: chan_zap.c:5397 mkintf:
> Unable to open channel 2: No such device or address
> here = 0, tmp->channel = 2, channel = 2
> Jul  8 13:53:58 ERROR[16384]: chan_zap.c:7668 setup_zap:
> Unable to register channel '2-3'
> Jul  8 13:53:58 WARNING[16384]: loader.c:313
> ast_load_resource: chan_zap.so: load_module failed,
> returning -1
>   == Unregistered channel type 'Tor'
>   == Unregistered channel type 'Zap'
>     -- Unregistered channel 1
> Jul  8 13:53:58 WARNING[16384]: loader.c:408
> load_modules: Loading module chan_zap.so failed!
> Segmentation fault
> 
> 
> what to do? i have latest CVS asterisk ..
> thank you,
> Tomaz
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>
   http://lists.digium.com/mailman/listinfo/asterisk-users

_____________________________________________________________________
For super low premiums ,click here http://www.dialdirect.co.za/quote