[Asterisk-Users] odd behavior - adtran ta 850 + t100p

[Jeff Roberts]

listbox at adamsbrothers.com wrote:

>I've been working with an adtran ta 850 hooked to a t100p pretty much all
>day today, and I haven't gotten past configuring zaptel.conf and
>zapata.conf.  For some reason, when I pick up analog phone hooked up to
>the first module of a quad fxs card in the second slot of the ta 850,
>asterisk thinks that all four of the fxs modules in that card are going
>off hook.  If I pick up a phone hooked to module 2 of the same fxs card
>then asterisk (correctly) only sees that module go off hook.
>
>When plugging a phone into any of the fxs pairs, I only get dial tone for
>a second or two and then I get silence.  However, I can still dial
>extensions and get through.  I'm not sure but maybe it is a config problem
>with the ta 850, as it takes a little more manual configuration than the
>ta 750 I worked with before.  Anybody have any pointers?
>
>Here is the output on the console when I pick up a phone on module 1, and
>module 2, respectively:
>
>root at slack1:~# asterisk -r
>Asterisk CVS-HEAD-07/06/04-12:37:58, Copyright (C) 1999-2004 Digium.
>Written by Mark Spencer <markster at digium.com>
>=========================================================================
>Connected to Asterisk CVS-HEAD-07/06/04-12:37:58 currently running on
>slack1 (pid = 702)
>- Remote UNIX connection
>    -- Starting simple switch on 'Zap/5-1'
>    -- Starting simple switch on 'Zap/6-1'
>    -- Starting simple switch on 'Zap/7-1'
>    -- Starting simple switch on 'Zap/8-1'
>    -- Hungup 'Zap/5-1'
>    -- Hungup 'Zap/6-1'
>    -- Hungup 'Zap/7-1'
>    -- Hungup 'Zap/8-1'
>    -- Starting simple switch on 'Zap/5-1'
>Jul  6 22:30:03 WARNING[163850]: chan_zap.c:1288 zt_set_hook: zt hook
>failed: Device or resource busy
>Jul  6 22:30:03 WARNING[163850]: chan_zap.c:1288 zt_set_hook: zt hook
>failed: Device or resource busy
>    -- Starting simple switch on 'Zap/6-1'
>    -- Starting simple switch on 'Zap/7-1'
>Jul  6 22:30:03 WARNING[163850]: chan_zap.c:1288 zt_set_hook: zt hook
>failed: Device or resource busy
>    -- Starting simple switch on 'Zap/8-1'
>    -- Hungup 'Zap/5-1'
>    -- Hungup 'Zap/6-1'
>    -- Hungup 'Zap/7-1'
>    -- Hungup 'Zap/8-1'
>    -- Starting simple switch on 'Zap/6-1'
>    -- Hungup 'Zap/6-1'
>
>
>Here is zaptel.conf:
>
>span=1,0,0,esf,b8zs
>loadzone = us
>defaultzone=us
>fxsks=1
>fxoks=5-24
>
>And here is zapata.conf:
>
>[channels]
>transfer=yes
>
>context=default
>
>language = en
>usecallerid = no
>hidecallerid = no
>echocancel=yes
>echocancelwhenbridged=yes
>rxgain=0.0
>txgain=0.0
>immediate=no
>signalling=fxs_ks
>echotraining=yes
>
>group = 0
>channel => 1
>
>context=trusted
>group = 1
>
>signalling = fxo_ks
>rxwink = 300
>
>channel => 5-24
>
>Any help appreciated,
>-Jeff
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>  
>
Well I tried setting up the the unused fxo ports, tried setting them to 
unused, and even moved the fxs cards around in the bank to see if it 
would make any difference. No joy though.  Anybody know how to run some 
self tests on this bank to be sure its the problem?  I'm pretty sure 
adtran will fix or replace the bank, but I'm sure they are going to want 
me to explain the problem but I'm not sure what info they'll need.