[Asterisk-Users] ztdummy running, but moh & meetme don't work
brian
brian at bkw.org
Tue Jul 6 10:30:46 MST 2004
Make sure you answer the line first.
exten => 999,1,Answer
exten => 999,2,MusicOnHold(default)
> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> admin at lists.digium.com] On Behalf Of Jack Turer
> Sent: Tuesday, July 06, 2004 11:43 AM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] ztdummy running, but moh & meetme don't work
>
> Any thoughts on the following?
>
> I am running asterisk from CVS (downloaded yesterday's
> version, just to be sure) on a test system with no
> digium cards in it, so I have installed ztdummy (see
> logs and screenshots below) as a timing source.
>
> When I call the music on hold extension from a Sipura
> Sip connected analog phone, I hear nothing and start
> getting
>
> Warning[98310]: chan_sip.c:674 retrans_pkt: Maximum
> retries exceeded on call
> cb70fdb1-df-408047 at 192.168.1.17 for seqno 102
> (Non-critical Response)
>
> As well, I set up a meetme conference, and dial it,
> the first user (also a Sipura sip phone) gets 'there
> are no other users on the conference..", which is OK,
> then a second user comes in, but they are not
> conferenced anymore. I can hang up both phones, and
> dial back to the conference, but I won't even hear the
> 'there are no other users message anymore'.
>
> usb-uhci and ztdummy are loaded fine (see lsmod), and
> this system is running Redhat9 standard install with
> linux sources.
>
> Any thoughts what might be wrong? I have already spent
> the whole night googling and looking around, so I
> think I covered all the basics already.
>
> I tried to use zaptelrtc as an alternative to ztdummy,
> but it doesn't compile on redhat9 (log below as well),
> so that is not an alternative either.
>
> Is ztdummy fairly reliable, or does it not work on
> some motherboard usb chipsets? (this is a compaq
> deskpro pentium 400mhz)
>
> Is there something I need to do with my kernel
> (recompile?) so that ztdummy works, or anything else.
>
> (I suspect the cause is ztdummy, since both MOH and
> Meetme are broken..)
>
> Thank you
> ---
>
> Logs/Listings
>
> #service zaptel start
> Loading zaptel framework:
> [ OK ]
> Loading zaptel hardware modules: wcusb
> Running ztcfg:
> [ OK ]
>
> #modprobe ztdummy
>
> -->lsmod listing
> #lsmod
>
> Module Size Used by Not tainted
> soundcore 6116 0 (autoclean)
> ztdummy 2532 0 (unused)
> parport_pc 17508 1 (autoclean)
> lp 8580 0 (autoclean)
> parport 33952 1 (autoclean)
> [parport_pc lp]
> iptable_filter 2316 0 (autoclean) (unused)
> ip_tables 14488 1 [iptable_filter]
> autofs 12148 0 (autoclean) (unused)
> e100 56644 1
> wcusb 20064 0 (unused)
> zaptel 179840 4 [ztdummy wcusb]
> keybdev 2720 0 (unused)
> mousedev 5204 0
> hid 20772 0 (unused)
> input 5632 0 [keybdev mousedev
> hid]
> usb-uhci 24652 0 [ztdummy]
> usbcore 73088 1 [wcusb hid usb-uhci]
> ext3 64704 2
> jbd 47828 2 [ext3]
>
> -->extensions.conf (relavent part)
>
> ;dial 500 to join the conference (doesn't work though)
> exten=>500,1,Answer
> exten=>500,2,MeetMe(1234)
> ...
> ;dial 6000 to hear music on hold (doesn't work though)
> exten => 6000,1,Answer
> exten => 6000,2,MusicOnHold,default
>
> -->Meetme.conf
> [rooms]
> ;
> ; Usage is conf => confno[,pin]
> ;
> conf => 1234
>
> -->musiconhold.conf
> [classes]
> default => quietmp3:/var/lib/asterisk/mohmp3
>
>
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam? Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list