[Asterisk-Users] TE410P PINS

[Steven Critchfield]

On Tue, 2004-07-06 at 09:06, Scott Stingel wrote:
> >>You will have to change signalling to something like a channelized T1 to
> use a loopback, >>I think. The PRI has complementary protocols for CPE and
> NET sides of the link. Not sure >>if a loopback would come up if it is
> configured for CPE.
> >>--
> >>Steven Critchfield <critch at basesys.com>
>  
> 
> If I understand what you're trying to do (loop one E1 span to another to see
> if the card is defective), this should work fine (I've done it).
> 
> Just loop 1+2 to 4+5, set one span to CPE and the other to NET.  You should
> get green on both.  Calls initiated on channels on one will appear as
> inbound calls on the coresponding  channels on the other

This is a wonderful example of many eyes looking at a problem. I
completely didn't think about the spare ports. I had tunnel vision on
looping the port back on itself.
-- 
Steven Critchfield  <critch at basesys.com>