[Asterisk-Users] TDM400P GroundStart Problems

[ghost at silcon.com]

Hello,

I am having problems configuring a TDM400P 4 Port FXO card with
groundstart signalling.  The box has 2 X100P's, 1 TDM04B and 1 TDM40B.  I
can configure it for loopstart and it works, just not groundstart, which I
need for this installation.  What am I missing?

Thanks!
Mark




/etc/zaptel.conf

#two X100P FXO Cards
#
fxsls=1-2
# TDM400P 4 Port FXO (TDM04B)
fxsgs=3-6
# TDM400P 4 Port FXS (TDM40B)
fxoks=7-10


[root at pbx etc]# ztcfg -vvv

Zaptel Configuration
======================


Channel map:

Channel 01: FXS Loopstart (Default) (Slaves: 01)
Channel 02: FXS Loopstart (Default) (Slaves: 02)
Channel 03: FXS Groundstart (Default) (Slaves: 03)
Channel 04: FXS Groundstart (Default) (Slaves: 04)
Channel 05: FXS Groundstart (Default) (Slaves: 05)
Channel 06: FXS Groundstart (Default) (Slaves: 06)
Channel 07: FXO Kewlstart (Default) (Slaves: 07)
Channel 08: FXO Kewlstart (Default) (Slaves: 08)
Channel 09: FXO Kewlstart (Default) (Slaves: 09)
Channel 10: FXO Kewlstart (Default) (Slaves: 10)

10 channels configured.

ZT_CHANCONFIG failed on channel 3: Invalid argument (22)
Did you forget that FXS interfaces are configured with FXO signalling
and that FXO interfaces use FXS signalling?
[root at pbx etc]#