[Asterisk-Users] TE410P PINS

[Scott Stingel]

Hi-

Only pins 1-2 and 4-5 are used, so one of the two cables should work.
(probably the straight through cable)

On your zaptel, you should use the phone company as the source for
asterisk's internal clock, like:

span=1,1,0,ccs,hdb3,crc4
(But I don't think this would make a difference on the red alarm).  Also,
try removing crc4 at the end.

Did you do the following before starting asterisk?

modprobe -v wct4xxp 
sleep 2
ztcfg -vv

When you do these commands, is there an error?

Also, in your /etc/asterisk/zapata, did you specify: signalling=pri_cpe ?

Regards
Scott Stingel




Scott M. Stingel
President,
Emerging Voice Technology, Inc.
Palo Alto California & London England
www.evtmedia.com 

-----Original Message-----
From: asterisk-users-admin at lists.digium.com
[mailto:asterisk-users-admin at lists.digium.com] On Behalf Of Wolfgang Pichler
Sent: Friday, July 02, 2004 4:42 AM
To: Asterisk-Users Mailinglist
Subject: [Asterisk-Users] TE410P PINS

hi all,

i am getting crazy with my TE410P - it won't work

now we already think that the only thing which can be wrong is the cable.
At our telecom endpoint we have 1-2 tx, 4-5 rx So - which cable do i need to
get it working

Already tried a cross over cable 1-2 -> 4-5 / 4-5 -> 1-2 (with this cable
nothing works -> red alarm on both ends) Also a normal cable 1-2 -> 1-2 /
4-5 -> 4-5 (with this cable the telecom endpoint gets a signal - but it
seems to be the wrong coding/framing - but the TE410P is still on red alarm)

so, could it be that it will need a: 4-5 -> 4-5, 1-2 -> 7-8 ? (never heard
about something like this)

my zaptel.conf is:
----------------------------
span=1,0,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16

loadzone=at
defaultzone=at
----------------------------
as you can see i am located in austria - my telco is telekom Austria

thanks for any help

best regards
Wolfi

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users