[Asterisk-Users] Can't transfer with Zap and SPA-2000

brian brian at bkw.org
Thu Jul 1 09:03:53 MST 2004


No t or T needed it works fine if you use ulaw.  I do it every single day.

bkw

> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com [mailto:asterisk-users-
> admin at lists.digium.com] On Behalf Of Mike Benoit
> Sent: Thursday, July 01, 2004 10:32 AM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] Can't transfer with Zap and SPA-2000
>
> It doesn't look like your using "t" or "T" in your Dial command.
>
> The Wiki on voip-info.org will explain those flags.
>
> On Wed, 2004-06-30 at 20:05 -0700, Seth Mattinen wrote:
> > I am having trouble getting transfers to work when a zap channel is
> > part of the call. I have a couple SPA-2000's and some X100P cards as my
> > setup. This is what I'm trying:
> >
> > Dial number from phone:
> >      -- Executing Dial("SIP/206-2c61", "Zap/1/#######") in new stack
> > Currently on call:
> >      -- Called 1/#######
> > Press flash to place call on hold with SPA-2000:
> >      -- Hungup 'Zap/1-1'
> >
> > As soon as I press the "flash" button on my SPA-2000 connected phone,
> > the zap channel hangs up and the call is disconnected. The same
> > procedure works fine between SIP channels (flash to hold, or transfer).
> > I'm hoping this is just a config problem and not a general defect,
> > because it seems odd to me that I can't transfer calls when a zap
> > channel is the other end of the call I want to transfer or place on
> > hold.
> >
> > sip.conf:
> >
> > [206]
> > type=friend
> > username=206
> > secret=blah
> > host=dynamic
> > context=from-sip
> > reinvite=no
> > canreinvite=no
> > disallow=all
> > allow=ulaw
> > nat=0
> >
> > zapata.conf:
> >
> > [channels]
> > language=en
> > signalling=fxs_ks
> > usecallerid=no
> > echotraining=800
> > echocancel=yes
> > echocancelwhenbridged=yes
> > rxgain=2.5
> > txgain=7.0
> > busydetect=yes
> > busycount=8
> > faxdetect=incoming
> > context=inbound-analog1
> > channel => 1
> > context=inbound-analog2
> > channel => 2
> >
> >
> >
> >
> > --
> > Seth "experientia docet" Mattinen
> > sethm at rollernet.us
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> --
> Mike Benoit <ipso at snappymail.ca>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users





More information about the asterisk-users mailing list