[Asterisk-Users] TE410P E1 PRI problem

[C. Maj]

On Sat, 31 Jan 2004, Tomica Crnek waxed:

> Hi everyone!
>  
> Here is my configuration and messages taken from Asterisk startup. The E1 PRI trunk is connected to our national telecom company here in Croatia. When I call from outside over this trunk to my company I get 'error in connection' respnse. In the same moment I can't see anything in Asterisk, nothing that will tell me that the call reached Asterisk. I think there is a problem with PRI synchronization or PRI to zap communication.
>  
> The card I am using is TE410P, the first port is the one that I use.
>  
> /etc/zaptel.conf
> -----------------
> # port 1: trunk to telecom
> span=1,0,0,ccs,hdb3

Try this instead:

    span=1,1,0,ccs,hdb3

(Note the second 1, that sets your timing to the telecom.)

--Chris


-- 

Chris Maj <cmaj_hat_freedomcorpse_hot_info>
Pronunciation Guide:  Maj == May
Fingerprint: 43D6 799C F6CF F920 6623  DC85 C8A3 CFFE F0DE C146