[Asterisk-Users] Sipura 2000 Transmit Issues? No Sound beingpassed to caller

[Steven E. Frazier]

I added the music on hold feature.  I answer on line 1, flash for a sec and
come back and transmission both way is fine, just can't answer initially.



> -----Original Message-----
> From: asterisk-users-admin at lists.digium.com 
> [mailto:asterisk-users-admin at lists.digium.com] On Behalf Of 
> Miguel Cavazos
> Sent: Sunday, January 25, 2004 11:55 AM
> To: asterisk-users at lists.digium.com
> Subject: Re: [Asterisk-Users] Sipura 2000 Transmit Issues? No 
> Sound beingpassed to caller
> 
> 
> same here, when i recive an incoming call from x100p to line 
> 1 on sipura, i can hear them but people can't hear me im 
> using 1.0.24 on my firmware
> 
> Miguel
> On Sun, 2004-01-25 at 20:54, Chris Higgins wrote:
> > Frankie Gravato wrote:
> > 
> > > 
> > > I've  been  beating  my head for 5 hours to figure out why my 
> > > asterisk server or sipura isn't passing my voice over to 
> the caller. 
> > > It seems i can  hear  the  caller  but  they  can't  hear  me it 
> > > seems either the asterisk or the sipura isn't passing this 
> > > information.
> > > 
> > > Here's my setup specs
> > > 
> > > asterisk  server  0.7.1  - X100P Card - Sipura 2000 - 
> Nufone Service 
> > > - Voicepulse Service and DID's
> > > 
> > > when  i  get  Phone call using the Voicepulse or Pstn the caller 
> > > can't hear  me  or  barely  hear me. The Sipura is 
> running Firmware 
> > > 1.20 and calls  are  being  passed  using  Ulaw  Codec? 
> Anyone out 
> > > there in the asterisk community please oh please help me 
> before i do 
> > > something that my asterisk server won't like.
> > > 
> > > 
> > 
> > I just received my Sipura on Friday and have been testing it 
> > extensively
> > over the weekend.  I have noticed an issue similar to what 
> you mention 
> > above.  For the record, the sipura tells me I'm running 
> software version 
> > 1.0.20.  Also, there is NO nat configuration that is 
> causing my problem.
> > 
> > When I receive a call over my X100P and dial my 3 SIP phones (one gs
> > budgetone 100, two analong phones through sipura), if I answer the 
> > analong phone connected to line 1 of the sipura, the caller 
> cannot hear 
> > anything.  I've only noticed this problem in this exact 
> scenario.  The 
> > other situations listed below have no problems whatsoever and audio 
> > works in both directions:
> > 
> > 1. Call from sipura line 1 to any internal SIP phone.
> > 1. Call from any internal SIP phone to sipura line 1.
> > 2. Call from sipura line 1 out through X100P.
> > 3. Call into my X100P from outside and answer sipura line 
> 2. 4. Call 
> > into my X100P from outside and answer sipura line 2 and 
> THEN transfer 
> > to sipura line 1. 5. Call into my X100P from outside and 
> answer sipura 
> > line 1 (the caller cannot hear audio for this leg of the 
> > conversation), TRANSFER to any other line, and transfer 
> back to sipura 
> > line 1.  After the second transfer, the caller can hear audio from 
> > sipura line 1.
> > 
> > I don't know what is special about line 1.  I've switched my analog
> > phones across the two ports on the sipura to make sure it 
> wasn't one of 
> > my phones (not that I thought it was anyway).
> > 
> > Frankie, have you tried the same experiment, but pulled your analog
> > phone from line 1 and put it in line 2?
> > 
> > Has anyone else seen issues like this with line 1 on a sipura?
> > 
> > Thanks..
> > 
> > -- Chris
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com 
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/aster> isk-users
> To 
> UNSUBSCRIBE or update options visit:
>    
http://lists.digium.com/mailman/listinfo/asterisk-users