AW: [Asterisk-Users] I got it (was: Cisco 7940 with asterisk)

[Martin Bene]

Hi Siggi/Jan,

>If so, there's still a load version conflict (although I've 
>never seen a
>7960 or 7940 care about the version communicated through SCCP):
>
>On the phone, press "Settings", then 4 for load information.
>watch out for the "App-Load-ID". On my 7940, this is 
>"P00305000300". Yours
>is most likely a smaller number...
>
>If you have a CVS version of chan_sccp (either Jan's CVS or 
>Theo's), just
>add this exact string to your /etc/asterisk/sccp.conf in the device
>definition for your phone, ie. something like:

I've had the same problem (looping resets) with my 7940.

The "Error Verifying Config Info" Message doesn't have anything to do with
the real problem. I also get that message, possibly because I don't keep a
device specific config file (SEP000D65707B78.cnf.xml) or
DISTINCTIVERINGLIST.XML on my tftp server.

The real problem is keepalive timing:

	* the 7940 doesn't like the 5 second default timeout - set timeout to
>=10 seconds and you avoid the restart loop.

Bye, Martin
********************************************************
Martin Bene,                 CTO
icomedias GmbH,              A-8020 Graz, Entenplatz 1b
t +43 (316) 721671-14,       f +43 (316) 721671-26
e martin.bene at icomedias.com, i http://www.icomedias.com
********************************************************