[Asterisk-Users] E1 - E100P connected to Cisco - problem

[Daniel Bichara]

Hi,

I am trying to connect * E100P directly to Cisco using an ATM circuit. 
The ATM circuit is ok (I can connect to Ciscos). I do not understando 
too much about Cisco syntax, please help me.

#############
Cisco Conf:

isdn switch-type primary-net5
isdn voice-call-failure 0

controller E1 3
framing NO-CRC4
clock source line primary
pri-group timeslots 1-31

interface Serial3:15
no ip address
isdn switch-type primary-net5
isdn overlap-receiving T302 2000
isdn incoming-voice modem
isdn send-alerting
no cdp enable

#############
Zaptel.Conf:

span=2,1,0,ccs,hdb3,yellow
bchan=32-46,48-62
dchan=47

#############
Zapata.conf:

callwaiting=yes
callwaitingcallerid=yes
threewaycalling=no
transfer=no
cancallforward=no
callreturn=no
echocancel=yes
echocancelwhenbridged=yes
group = 2
signalling = pri_net
switchtype = national
channel => 32-46
channel => 48-62

Thanks in advance,

Daniel