[Asterisk-Users] ATA call
Osvaldo Mundim Junior
osvaldo at ilinksolutions.com
Tue Jan 6 16:39:36 MST 2004
Hi Doug,
I do use the SIP 2.16x on my ATA 186. But I can not see the IP address of my
ATA on show sip peers. What I can see is:
----- Original Message -----
From: "Doug Shubert" <doug at accessgate.net>
To: <asterisk-users at lists.digium.com>
Sent: Tuesday, January 06, 2004 9:09 AM
Subject: Re: [Asterisk-Users] ATA call
> Is your ATA running SIP if so, what version (2.16?)
>
> With SIP, then * extensions.conf and sip.conf files are configured
> you should see the following
>
> asterisk3*CLI> sip show peers
> Name/username Host Mask Port Status
> 3000/3000 10.0.0.30 (D) 255.255.255.255 5060 OK (15 ms)
> 9000/9000 10.0.0.90 (D) 255.255.255.255 5060 OK (47 ms)
>
> ext 3000 is the Cisco ATA 186 and ext 9000 is the Cisco 7960
>
> to test an extension from the CLI
> CLI>dial <ext. #>
> you should hear your ATA ring
>
> Doug
>
> Osvaldo Mundim Junior wrote:
>
> > Hey all!
> >
> > I'm having problems trying to set up an ATA 186 with my Asterisk box.
When I
> > get the phone to place the call, I type the extension and I only get
busy
> > signal after 5 seconds. So I can't call my Asterisk box from my ATA and
> > either call from my Asterisk to my ATA.
> >
> > Does anybody know what can be happing?
> >
> > Log is attached..
> >
> > tks
> > regards
> > Oz
> >
>
------------------------------------------------------------------------
> > Name: ast_log.txt
> > ast_log.txt Type: Plain Text (text/plain)
> > Encoding: quoted-printable
>
> --
> FREE Unlimited Worldwide Voip calling
> set-up an account and start saving today!
> http://www.voippages.com ext. 7000
> http://www.pulver.com/fwd/ ext. 83740
> free IP phone software @
> http://www.xten.com/
> http://iaxclient.sourceforge.net/iaxcomm/
>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list