[Asterisk-Users] ATA call

[Doug Shubert]

Is your ATA running SIP if so, what version (2.16?)

With SIP, then * extensions.conf and sip.conf files are configured
you should see the following

asterisk3*CLI> sip show peers
Name/username    Host                 Mask             Port     Status
3000/3000        10.0.0.30       (D)  255.255.255.255  5060     OK (15 ms)
9000/9000        10.0.0.90       (D)  255.255.255.255  5060     OK (47 ms)

ext 3000 is the Cisco ATA 186 and ext 9000 is the Cisco 7960

to test an extension from the CLI
CLI>dial <ext. #>
you should hear your ATA ring

Doug

Osvaldo Mundim Junior wrote:

> Hey all!
>
> I'm having problems trying to set up an ATA 186 with my Asterisk box. When I
> get the phone to place the call, I type the extension and I only get busy
> signal after 5 seconds. So I can't call my Asterisk box from my ATA and
> either call from my Asterisk to my ATA.
>
> Does anybody know what can be happing?
>
> Log is attached..
>
> tks
> regards
> Oz
>
>   ------------------------------------------------------------------------
>                   Name: ast_log.txt
>    ast_log.txt    Type: Plain Text (text/plain)
>               Encoding: quoted-printable

--
FREE Unlimited Worldwide Voip calling
set-up an account and start saving today!
http://www.voippages.com ext. 7000
http://www.pulver.com/fwd/ ext. 83740
free IP phone software @
http://www.xten.com/
http://iaxclient.sourceforge.net/iaxcomm/