[Asterisk-Users] Failed to start asterisk

[Michiel Betel]

Did you change the Makefile to set the processor to i586??? The Via C3 
(up to the 900Mhz model) identifies itself as a i686, but misses an 
instruction..


dkwok wrote:

> I am using mini-itx motherboard and I installed asterisk stable from 
> cvs. However below is the messages when starting asterisk by 
> safe_asterisk. Anyone spotted the cause of not starting.
>
> Last login: Fri Feb 27 10:40:44 2004
> [root at mini root]# safe_asterisk
> [root at mini root]# /usr/sbin/safe_asterisk: line 77:  3448 Illegal 
> instruction     (core dumped) asterisk ${ASTARGS} 1>&/dev/${TTY} 
> </dev/${TTY}
> Asterisk ended with exit status 132
> Asterisk exited on signal 4.
> Automatically restarting Asterisk.
> /usr/sbin/safe_asterisk: line 77:  3463 Illegal instruction     (core 
> dumped) asterisk ${ASTARGS} 1>&/dev/${TTY} </dev/${TTY}
> Asterisk ended with exit status 132
> Asterisk exited on signal 4.
> Automatically restarting Asterisk.
> /usr/sbin/safe_asterisk: line 77:  3478 Illegal instruction     (core 
> dumped) asterisk ${ASTARGS} 1>&/dev/${TTY} </dev/${TTY}
> Asterisk ended with exit status 132
> Asterisk exited on signal 4.
> Automatically restarting Asterisk.
> /usr/sbin/safe_asterisk: line 77:  3493 Illegal instruction     (core 
> dumped) asterisk ${ASTARGS} 1>&/dev/${TTY} </dev/${TTY}
> Asterisk ended with exit status 132
> Asterisk exited on signal 4.
> Automatically restarting Asterisk.
> /usr/sbin/safe_asterisk: line 44: /dev/tty9: Input/output error
> /usr/sbin/safe_asterisk: line 45: /dev/tty9: Input/output error
> Asterisk ended with exit status 1
> Asterisk died with code 1.  Aborting.
>