[Asterisk-Users] Re: 12SP registration

Roger De Salis roger at desalis.gen.nz
Tue Feb 24 23:40:38 MST 2004


A further question...

How would you support multiple 12SP's on an asterisk install
if only one can be hardcoded into the source/binary?

Is this a mini programming project to add the magic number
to the /etc/asterisk/skinny.conf, and then have chan_skinny.c
search the config file?

Ta muchly.

Roger De Salis

> ------
> Date: Tue, 24 Feb 2004 09:57:57 -0000
> Subject: Re: [Asterisk-Users] 12SP
> From: Robert Boardman <robb at boardman.me.uk>
>
> Hi Cullen 
> You need to change the hard coded firmware in chan_skinny.c line 71 ish
 > to the numbers that show up when your phone boots, re compile and all
 > will be fine
> Robb
> 
> Cullen Simpson <cullen at compucrew.com> said:
>>I am trying to get a Cisco 12SP phone to work with *.
>>I do not have call manager.
>>
>>When start * and turn skinny debugging on I get this on the console:
>>--------------------------------------------------------------------------
>>    -- Starting Skinny session from 192.168.1.202
>>Recieved AlarmMessage
>>Device SEP0010EB003E03 is attempting to register
>>    -- Device 'ipme' successfuly registered
>>Requesting capabilities
>>Version Request
>>Received CapabilitiesRes
>>Feb 23 16:29:29 WARNING[794722]: chan_skinny.c:2275 get_input: Skinny Client
>>sent less data than expected.
>>Feb 23 16:29:29 NOTICE[794722]: chan_skinny.c:2333 skinny_session: Skinny
>>Session returned: Success
>>---------------------------------------------------------------------------
>>
>>The phone indicates that it is programming. The IP address of the phone is
>>correct in the logs.
>>
>>Here is a snippet from my skinny.conf file:
>>
>>---------------------------------------------------------------------------
>>[general]
>>port = 2000             ; Port to bind to, default tcp/2000
>>bindaddr = 192.168.1.11 ; Address to bind to
>>dateFormat = M-D-Y      ; M,D,Y in any order (5 chars max)
>>keepAlive = 120
>>
>>; allow = all
>>; disallow =
>>
>>
>>; Typical config for 12SP+
>>[ipme]
>>device=SEP0010EB003E03
>>version=P002G204        ; Thanks critch
>>context=outbound-analog
>>line => 120             ; Dial(Skinny/120 at ipme)
>>
>>---------------------------------------------------------------------
>>
>>Any ideas?
>>
>>--
>>Cullen Simpson
>>cullen at compucrew.com
>>_______________________________________________

-- 
  \_    Roger De Salis                   rdesalis at fx dot net dot nz
  </'   FX Networks                      +64 21 481 452
  /)    Wellington, New Zealand          roger at desalis dot gen dot nz
(/	
`  Bentley win Le Mans! - What next, English win cricket in Aus?




More information about the asterisk-users mailing list