[Asterisk-Users] codec order in SIP doesn't work

[Brian West]

Also just an FYI

allow=ulaw,g726,gsm,g729

That only works in sip.conf right now.

bkw

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Antony Stone
> Sent: Wednesday, December 15, 2004 8:38 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] codec order in SIP doesn't work
> 
> On Wednesday 15 December 2004 14:21, Roy Sigurd Karlsbakk wrote:
> 
> > hi
> >
> > using the following in sip.conf, codec preferences aren't set, and
> > asterisk uses alaw whatever I do, except force it to one specific in
> > the [user]
> >
> > [general]
> > disallow=all
> > allow=g726
> > allow=g729
> > allow=gsm
> > allow=alaw
> >
> > then, from 'sip show peer something' it tells me
> >
> >    Codecs       : 0x11a (gsm|alaw|g726|g729)
> >    Codec Order  : (none)
> >
> > can someone please explaing why?
> 
> http://www.fnords.org/~eric/asterisk/sip.conf.shtml
> http://lists.digium.com/pipermail/asterisk-dev/2004-September/006406.html
> 
> > this is version
> >
> > Asterisk CVS-v1-0-10/08/04-17:29:04 built by root at sipgw1 on a i686
> > running Linux
> 
> Try an upgrade to current stable version:
> 
> http://lists.digium.com/pipermail/asterisk-users/2004-December/076772.html
> 
> Regards,
> 
> Antony.
> 
> --
> This email was created using 100% recycled electrons.
> 
>                                                      Please reply to the
> list;
>                                                            please don't CC
> me.
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users