[Asterisk-Users] Sipura SPA-2000 won't ring

[Me]

It seems that this is now fixed!

Looks like it was the NAT "Keep Alive" setting which needed to be set to 
"yes" in my case.

--
Start Your Own ISP!
http://www.YourOwnISP.com
----- Original Message ----- 
From: "Me" <mylist at lightwavetech.com>
To: <asterisk-users at lists.digium.com>
Sent: Sunday, December 12, 2004 10:45 PM
Subject: [Asterisk-Users] Sipura SPA-2000 won't ring


>I had a Grandstream 286 at my home hitting my Asterisk box at the office,
> all worked well and I received phone calls fine until the device just up 
> and
> died.
>
> I replaced this unit with an SPA-2000 because I have been impressed with 
> the
> Sipura devices and decided to use them for most of my needs in the future.
>
> Problem is that my phone attached to the device rings shortly after power 
> up
> of the device but seems to lose it's head after a period of time and stops
> ringing until I power cycle the unit or reboot it.
>
> My Asterisk config is the same regarding NAT for this extension and I have
> the Sipura registering with * so I am at a loss as to why Asterisk loses 
> or
> stops ringing this device.
>
> I have dug around and can't seem to solve this issue so far, any help 
> would
> be appreciated.
>
> --
> Start Your Own ISP!
> http://www.YourOwnISP.com
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users