[Asterisk-Users] dead BT100

[Steve Totaro]

if you are running the latest firmware then click on the tab at the top for
advanced settings.


----- Original Message ----- 
From: "david kwok" <dkwok at iware.com.au>
To: <asterisk-users at lists.digium.com>
Sent: Wednesday, December 08, 2004 1:12 AM
Subject: [Asterisk-Users] dead BT100


> My BT100 hangs during a firmware upgrade. After numerous retry, I finaly
> got it boot up again. I can ping the phone. However it seems to have
> lost the network setup.
>
> Using the web interface, it displays an abbreviated web page with logon,
> password, ip address, router and dns details. It misses all the other
> information like codec, dtmf, sip server etc. At bottom it has time zone
> and day light settings. That is it. It is not registering with Asterisk
> and can only be contact with ping and web. I have tried and uploaded a
> configuration file, cfg000b82600. But it does not make any difference.
>
> I have read other postings about reconnecting to tftp server to bring
> back to life. I think it did complete its upgrade from the tftp server.
> But there seems to be something missing here.
>
> Has anyone have this near dead experience and bring it back to life?
>
> David Kwok
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>