[Asterisk-Users] Polycom IP500

Tim Jackson tim at angelinacounty.net
Thu Dec 2 08:06:32 MST 2004


Theres no NAT going on here. Just 1 router in between, phones reside on
10.24.102.0/24 Asterisk resides on 10.24.100.0/24, so this isn't a NAT
problem. Any other ideas?

-Tim

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Andrei
(MPI)
Sent: Wednesday, December 01, 2004 11:15 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Polycom IP500

Tim,

You may see description of new 1.3.4 firmware at polycom.com (check - 
http://www.polycom.com/common/pw_cmp_updateDocKeywords/0,1687,3641,00.pd
f 
) released in October.

Though, it was proven over time that troubles with a SIP phone like "not

hearing" one side or the other is NAT related problems. You may want to 
investigate firewall setup. I am not saying it is not phone related, but

the phone would be the last one to blame.

Also, may I express my feelfings about Cisco and Polycom - not allowing 
direct firmware download for their phones - that sucks big time. I will 
get the firmware this way or the other. They just force me to waste my 
time again and again contacting their dealers and searching the 
internet. That should just enrage customers, in my opinion. Are they so 
big, they do not even care?

Sincerely,
Andrei

Tim Jackson wrote:

>Any idea if 1.34 fixes the problems with the phones being up for long
>periods of time and weird call problems (I cannot hear remote caller,
>but they can hear me) ?
>
>-Tim
>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Paul
Hales
>Sent: Wednesday, December 01, 2004 6:00 PM
>To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
>Subject: RE: [Asterisk-Users] Polycom IP500
>
>
>Any idea if 1.34 makes Daylight Savings work for us people in
Australia?
>
>PaulH 
>
>-----Original Message-----
>From: Andrei (MPI) [mailto:asterisk at markovprocesses.com] 
>Sent: Thursday, 2 December 2004 9:30 AM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: Re: [Asterisk-Users] Polycom IP500
>
>Hi Chris,
>
>First of all,  you need to configure ftp or tftp and watch syslog
>closely -
>what the phone is looking for at boot time. You would need to put
config
>files into (t)ftp directory, named according to MAC address of you
>phone.
>XML and Web is really weird - they do not even share same config data.
>For
>example, I had to change address of SNTP server (clock) and it still
was
>showing as 'clock' on Web admin page for the phone. I will email you
the
>config files I got from a good fellow from this list not so long ago...
>and
>those config files do really help!
>
>Also, I suggest that you upgrade your SIP firmware if you have not done
>it
>yet. I got the Polycom 500 with firmware which was very old and
>incapable to
>work with asterisk. Mine is 1.3.1 now
>(http://www.freedomphones.net/polycom/files/).
>
>If anyone has SIP firmware 1.3.4 - please make it downloadable
somewhere
>on
>the internet?
>
>Thank you,
>Andrei
>
>Chris Cherry wrote:
>
>  
>
>>Hey All,
>>
>>First Time Writing.
>>
>>I'm trying to set up my IP500 phones to register SIP with *. I input 
>>all the (I assume) correct data in to the fields on the Web Interface.

>>And I get no notification that the phone is even attempting to 
>>register, no failed messages etc. I have read that the Web interface
is
>>    
>>
>
>  
>
>>crap and the XML config files is the way to go. Does anyone have a 
>>basic config file that doesn't change any defaults? I couldn't seem to
>>    
>>
>find
>one.
>  
>
>>Extra Info:
>>Server is 192.168.0.3
>>Phone name/ext I want to be 301
>>
>>Thanks,
>>Chris Cherry
>>
>> 
>>
>>    
>>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>CAUTION: This email message and accompanying data may contain
>information
>that is confidential. If you are not the intended recipient, you are
>notified that any use, dissemination, distribution or copying of this
>message or data is prohibited. If you have received this email message
>in
>error, please notify us immediately and erase all copies of this
message
>and
>attachments. Thank you.
>
>CAUTION: This email message and accompanying data may contain
>information that is confidential. If you are not the intended
recipient,
>you are notified that any use, dissemination, distribution or copying
of
>this message or data is prohibited. If you have received this email
>message in error, please notify us immediately and erase all copies of
>this message and attachments. Thank you.
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>  
>

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list